trithings

Zwift Cog and Click upgrade kit for €12.50: will it work with your trainer?

By Trithings · 21 November 2026 · 5 min read

Photo: Brian McGuigan

Zwift has cut its Cog and Click Upgrade Kit from €49.99 to €12.50 in its EU shop, 75% off. The shop's banner says the sale ends on 30 November. At that price it is close to an easy yes, but only if your trainer is on Zwift's list. Here is how to check in two minutes, and which version to pick.

The short answer: if you own a Wahoo KICKR Core, KICKR Core 2, KICKR (2022 or newer), Zwift Hub, a recent Elite, a Tacx NEO 2 or later, a JetBlack Victory or Volt V2, or a Van Rysel D100, it is worth it. If your trainer is not on the list below, do not buy it: it will not work.

What you get

The kit is two parts (Zwift):

  • Zwift Cog: a single sprocket (with its own freehub, the part a cassette slides onto) that replaces the cassette on your trainer.
  • Zwift Click: a small wireless remote with plus and minus buttons that you strap to your handlebar.

Together they give you virtual shifting. Your chain stays on one sprocket and the trainer changes its resistance to feel like a gear change. Zwift says you get 24 virtual gears (Zwift), and shifts are instant and silent because nothing physical moves.

A Zwift Cog fitted to a Wahoo KICKR Core, with the chain on the single sprocket.
A Zwift Cog fitted to a Wahoo KICKR Core, with the chain on the single sprocket.

Will it work with your trainer?

Zwift keeps an official list of "Zwift Cog Compatible" trainers, last updated on 10 November 2026 (Zwift support). Only these take the kit:

  • Wahoo: KICKR CORE with cassette, KICKR CORE 2, KICKR (only version 6 from 2022 or newer), KICKR MOVE.
  • Zwift: Zwift Hub (the Hub One already has the cog).
  • Elite: Avanti, Direto, Direto X, Direto XR, Direto XR Team, Direto XR-T, Justo, Justo 2, Rivo, Suito and Suito-T.
  • Garmin Tacx: NEO 2, NEO 2SE, NEO 2T and NEO 3M. On the NEO 2, check the axle type before fitting.
  • JetBlack: Victory and Volt V2 (check it is the V2 by the angled shape on the housing).
  • Van Rysel: D100 (UK and EU only).

If your trainer already came "with Zwift Cog and Click" (the Zwift Ready versions, such as the KICKR CORE Zwift One or the Zwift Hub One), you have it already. Not on the list? Older Wahoo KICKRs, wheel-on trainers (where your back wheel presses on a roller) and many other brands are out. The kit only fits direct drive trainers, where you take the back wheel off.

Pick the right version

The shop asks you to choose a cog type, and this is the step to get right:

  • Multi-Trainer Cog: for Wahoo, Zwift Hub, JetBlack and Van Rysel (Zwift).
  • Elite Cog: for Elite trainers, with an 18 tooth sprocket instead of 14.
  • Garmin Tacx Cog: for Tacx NEO trainers. There is also an 18 tooth Tacx version.

The shop's product selector lets you pick your brand and model, so use it rather than guessing.

Will it work with your bike?

Very likely. Zwift says the cog fits almost any 8 to 13 speed bike. That is the real gain for a household with several bikes: a road bike, a gravel bike and a tri bike with different cassettes all fit the same trainer, with no spare cassette and no fiddling with the gears. It is not made for single speed or fixed gear chains (the wider 1/8 inch type).

The cog has 10 sprocket positions, so you can move it sideways until the chain runs as straight as possible from your chainring. In the photo below you can see the small number window on the cog, here showing position 5. A straighter chain runs quieter and wears less.

The Zwift Cog seen from above, with its position window showing 5.
The Zwift Cog seen from above, with its position window showing 5.

Zwift's page also says the cog is designed for Shimano Hyperglide freehub bodies, not SRAM XD or XDR, Shimano Micro Spline or Campagnolo. The kit comes with its own freehub, so this mostly matters if your trainer has had its freehub swapped. If in doubt, ask Zwift before you order.

Fitting it

Zwift describes the fitting as quick and tool free, though taking your old cassette off still needs a cassette tool and a chain whip. The steps from Zwift's support page:

  • Fit the Zwift Cog in place of your cassette.
  • Update your trainer to the latest firmware in the trainer maker's own app (Wahoo, Elite, Tacx and so on).
  • Pair the Click in Zwift. Buyers on Zwift's page also advise updating the Click itself through the Zwift Companion app straight away.

The Click runs on a CR2032 coin cell, the same battery as many heart rate straps, which Zwift says lasts over 100 hours. Both parts have a two year warranty, and the shop offers 30 day returns.

Who should buy it, and who should not

Buy it if your trainer is on the list, you ride mostly in Zwift, and you swap bikes or are tired of a noisy cassette. At €12.50 it costs less than a new chain.

Think twice if you mostly use other apps. Zwift's EU page lists Zwift and ROUVY for the Click. In other apps you are left with one gear, which is fine for ERG mode workouts (where the app sets your power) but not for free riding up a virtual climb.

Do not buy it if your trainer is not on Zwift's list. Even at €12.50 it would be a part you cannot use.

It also makes your trainer ready for the Zwift Ride smart frame later, if you ever want a dedicated indoor bike, though some Tacx models are not compatible with the Ride.

More for the indoor season

Still choosing a trainer? Our turbo trainer buying guide compares the options from €270. Wondering about Zwift's new paid tier? Read our Zwift Plus review. And for other checked savings this week, see our Black Friday deals.

Product links go to the maker's or shop's own page. If one ever earns us a commission, it never changes what we write.

Try the tools

Free, and no sign-up needed.

More to read